Guangzhou Evitek Electronic Co., Ltd.
WE ARE NOT YOUR BEST CHOICE, BUT WE ARE A GOOD CHOICE FOR YOU!
Add to Cart
High Brightness Xenon Hid Ballast , Bi Xenon Ballast H1 H3 Enegry Saving
Parameters of 35W AC Slim HID Ballast TN-3002
| Product Model | TN-3002 35W AC Slim HID Ballast |
| Ballast Power | 35 ± 3W |
| Output Voltage | AC 85V±15V |
| Working Temperature | -40℃~105℃ |
| Efficiency | ≥84% |
| Output Frequency | 260Hz~280Hz |
| Cooling Method | Full glue, Natural Cooling |
| Output power: | Reach 80% in cold starting in 3s,reach rating output power in 8s |
| Output voltage frequency: | 250±10 HZ |
| Instant ignition voltage: | 23000v~25000v |
Feature:
1. Saving power: Consumption of electricity is only 35w. It can save 40% electrical power than helogen;
2. High brightness: Increasing brightness 300% than helogen bulb;
3. Long life: More than 3000 hours;
4. Convenient install: Just need to install the HID into the original halogen place, make the ballast stable and attach the electrical lines. No need to remove the original automobile parts.
The differences between AC ballast and DC ballast:
1. Some HID use direct current(DC),the life span is short. Because the electrode has been attacked continuely. Some days passed,it will lead to the electrode igloss.It will decrease the electrode life span obviously. Using AC,the high speed plus ion attack the 2 elecrode well-proportioned. It will prolong the hid life span virtually. Another advantage is the electrode temperature has low temperature under AC. Because the cathode and anode exchage about 400 times per second(The electrode of DC is always anode). Then the two electrode share the heat in turn.
2. DC ballast has less 4 MOS tubes than AC ballast.Then it has simplify part of control circuit and save the cost.But without the 4 mos tubes,the ballast will be easily to be burnt.
3. The DC ballast output is direct current,no need frequency conversion.DC ballast has less 4 MOS tubes, then it will be easily to be burnt.
4. DC ballast is not easy to be defective,but for the hid lamp,the life span will be shorter.
5. DC ballast matches with DC hid lamp.If we use AC hid lamp on DC ballast,the AC hid lamp will be burnt easily.
6. For the DC ballast,now the common problem is hid lamp flicker. Now the technology is limited, it hasn't been resolved yet.
Pictures of 35W AC Slim HID Ballast TN-3002
If you are interested in our product, please feel free to contact us.